What this page can identify
The guide represents common Oregon mailing ZIPs—43616—and uses Oregon Public Water System with OH4800911 as the current research starting point.
Ohio city water report
Oregon Water Filtration and Utility Guide
Provider, PWSID, source-water, ZIP, testing and treatment research for properties in Oregon, Ohio.
Quick answer
Start with the bill, then verify the system record.
For a property in Oregon, the useful research sequence is provider first, current report second and property-specific testing third. That sequence avoids assigning a citywide result to the wrong address. The current research starting point is Oregon Public Water System, with a source profile described as lake erie surface water.
County contextLucas
Regional marketToledo and Northwest Ohio
Provider starting pointOregon Public Water System
PWSIDOH4800911
Evidence snapshot
What the current research supports for Oregon
Oregon's public system is tied to Lake Erie source water and regional cyanotoxin monitoring.
The provider record is a starting point, not a household diagnosis. Public-system information describes utility monitoring and compliance. It does not prove the condition at every address, account for service-line or building plumbing, or represent a private well.
- Confirm the exact utility name on the current bill
- Match the PWSID in Ohio Drinking Water Watch
- Open the newest Consumer Confidence Report
- Distinguish raw-water, finished-water and distribution samples
- Use a certified laboratory when the decision depends on the actual tap
Oregon verification profile
Local facts that change the research path
Northwest Ohio research should distinguish Lake Erie source-water monitoring, treatment-plant results and the local distribution account.
What still requires the address
The bill, service address, current report and property plumbing determine whether the starting point applies. ZIPs, city limits and county lines do not define one water-service boundary.
Useful nearby comparisons
Oregon is grouped with Toledo, Maumee, Perrysburg, Sylvania inside the Toledo and Northwest Ohio hub. Those pages help compare regional systems but do not prove that the same supplier serves each address.
Example decision:
A homeowner comparing equipment in Oregon should first verify whether the concern affects every fixture or only drinking water, because that choice changes point-of-entry versus point-of-use design.
ZIP-level starting points
Water utility and tap-water links by ZIP code in Oregon
ZIP codes do not define utility boundaries. The entries below are static research links for common Oregon mailing ZIPs. Confirm the street address, provider and PWSID before relying on a result.
ZIP references1Common city mailing ZIPs represented
Provider statusVerified Starting PointAddress-level verification still required
Data statusStatic linksDestination information may be updated by its publisher
| ZIP code | Postal use | Utility starting point | PWSID | Source profile | Research links |
|---|---|---|---|---|---|
| 43616 | Common street-address research ZIPUse the property street address, not a PO Box, to confirm the provider. | Oregon Public Water SystemVerified public-system research starting point; confirm the current account. | OH4800911 | Lake Erie surface water |
Use the Oregon ZIP links without assigning the wrong utility
- Use the street address—not a PO Box—to identify the property ZIP code.
- Open the ZIP search, then match the utility name against the current bill and the PWSID shown in the newest Consumer Confidence Report.
- Compare the independent EWG page with Ohio Drinking Water Watch, the utility report, Ohio EPA maps and property-specific testing before choosing equipment.
ZIP data attribution: common ZIP research starting points were compiled from Ready APIs curated-us-zips, sourced from the U.S. Census Bureau, USPS and SimpleMaps. Postal ZIPs are not water-service boundaries.
Treatment decision
Translate the evidence into the right question
A city report should lead to a better decision—not to an automatic equipment recommendation. The correct system depends on what is documented and what the household wants to improve.
Whole-house filtration
Consider point-of-entry treatment when the concern affects multiple fixtures and the exact model has the required reduction claims and flow capacity.
Compare whole-house systems →Water softening
Use measured hardness to size a softener. A softener controls calcium and magnesium scale; it is not a universal contaminant filter.
Understand water softeners →Reverse osmosis
RO is usually a drinking-water solution. Match the exact membrane system and certification to the specific dissolved substances of concern.
Review reverse osmosis →Professional installation and financing
Installation conditions, plumbing layout, drain access, flow, pressure and maintenance matter. Review professional installation and financing options before final equipment selection.
Related local research
Compare nearby Northwest Ohio city guides
Lucas County areaToledoToledo Public Water SystemLucas County areaMaumeeMaumee Public Water SystemWood County areaPerrysburgPerrysburg Public Water SystemLucas County areaSylvaniaSylvania Public Water SystemWood County areaBowling GreenBowling Green Public Water SystemHancock County areaFindlayFindlay Public Water System
Frequently asked questions
Oregon water research questions
Who supplies tap water in Oregon, Ohio?
The research starting point is Oregon Public Water System. That is not a guarantee for every address. Confirm the provider on the current bill and match OH4800911 in Ohio Drinking Water Watch before relying on a utility-wide result.
Do ZIP codes identify the water provider in Oregon?
No. ZIP codes are postal-delivery areas, not water-service boundaries. One ZIP can contain multiple public systems, purchased-water zones and private wells.
What should a Oregon homeowner review before buying filtration?
Review the current provider, PWSID, newest annual water-quality report, source-water type, any Ohio EPA or UCMR records relevant to that system, and property-specific conditions such as hardness, plumbing age, taste, odor or staining.
Does a utility report replace a tap-water test in Oregon?
No. A utility report describes system-wide monitoring. It cannot prove the same condition at every tap, and it does not describe private plumbing, service-line material, a private well or a treatment system already installed at the property.
Which treatment system is best for a property in Oregon?
There is no responsible citywide answer. A softener addresses hardness; carbon may address selected taste, odor and chemical-reduction goals; reverse osmosis targets drinking water; and whole-house filtration must be matched to flow, test evidence and exact certified claims.
Get help interpreting the evidence
Request a Oregon water review.
Share the provider, source, ZIP code, report or test result and the improvement you want. The response can address testing, whole-house filtration, softening, reverse osmosis, professional installation and financing availability.
- Provider and PWSID verification
- Testing and treatment decision support
- System sizing and installation questions
- Financing options subject to approval
Sources and limitations
Research sources for Oregon
These links are starting points. Use the newest utility report and current account information before relying on a result.
- EWG independent report for Oregon Public Water System
Independent utility comparison keyed to the PWSID; use alongside official records. - Ohio Drinking Water Watch
Search official public-water-system records by system number, name, county and source type. - Ohio EPA PFAS sampling service
Ohio treatment-plant sampling records distinguish systems, sample points, raw water and finished water. - Ohio EPA cyanotoxin monitoring service
Ohio monitoring for raw and finished water at participating public water systems. - EPA local drinking-water information
Federal guidance for identifying the supplier and annual Consumer Confidence Report. - EPA UCMR data finder
Unregulated-contaminant monitoring searchable by system, state, analyte and source-water type. - EWG Ohio utility directory
Independent comparison source; use alongside official utility and regulatory records.
Data timing: Ohio and EPA public-system records can lag current utility operations. EWG is an independent comparison source and is not a regulator or a Zero Trace Water partner. Ohio EPA PFAS and cyanotoxin records distinguish sample points and can include raw and finished water.